Manufacturing Technology Degrees & Certificates
MYECC APPLY

Manufacturing Technology Program and Degrees

 

 

Associate in Science Degree

   
The architecture program prepares students for transfer or for employment in the field. By completing the degree or certificate requirements, the students will gain proficiency in manual and computer aided drafting (CAD) fundamentals, three-dimensional drawing, model making, and structural analysis of buildings. Students will learn to interpret the Uniform Building Code and local planning and zoning ordinance. Competencies will be assessed in accordance with the American Insitute of Architects (A.I.A.) certification criteria. Students completing the program may expect to enter industry as an entry-level CAD draftsperson in an architecture firm or transfer to a university architecture program. Admin Degree Check-list Flyer Administration of Justice Check List Banner
       
El Camino College Major Requirements:  
At least 50% of the major requirements for the Assiciate in Science Degree must be completed at El Camino College.
Major Requirements
Machine Tool Technology 101
Introduction to Conventional and CNC Machining
(4 units)
Machine Tool Technology 10A
Introduction to CAD and CAM
(3 units)
or    
Computer Aided Design and Drafting 7
Solid Modeling, Assemblies and Two Dimensional (2D) Drawings 
(3 units)

or

Computer Aided Design and Drafting 5
Introduction to Mechanical Drafting
(3 units)

Machine Tool Technology 40
Machine Shop Calculations
(3 units)
Machine Tool Technology 2
Manufactoring Print Reading
(3 units)





Electronic Computer Hardware Technology 11
Introduction to Electronics
(3 units)

Welding 15
Basic Welding for Allied Fields
(3 units)



















a minimum of 18 units from:    

 

 

 

 

 

 

Computer Aided Design/Drafting 28
Parametric Three Dimensional (3D) Modeling and Assemblies
(2 units)

Computer Aided Design/Drafting 31
Orientation to CATIA
(2 units)

Computer Aided Design/Drafting 32
Product Modeling with CATIA
(2 units)

Computer Aided Design/Drafting 33
Analyses and Simulations with CATIA
(2 units)

Computer Aided Design/Drafting 37
Advanced CATIA Functions
(2 units)

Computer Aided Design/Drafting 45
Geometrical Dimensioning and Tolerancing
(3 units)

Electronic Computer Hardware Technology 22
Basic Electronic Fabrication
(3 units)


Electronic Computer Hardware Technology 110
Introduction to Direct and Alternating Current Circuits
(3 untis)


Electronic Computer Hardware Technology 120
Semiconductor Power Devices
(3 units)


Electronic Computer Hardware Technology 122
Semiconductor Power Devices
(3 units)


Electronic Computer Hardware Technology 124
Operational Amplifiers and Linear Integrated Circuits
(3 units)


Electronic Computer Hardware Technology 130
Digital Systems and Computer Logic I
(3 units)


Electronic Computer Hardware Technology 140
Computer Systems and Hardware Technologies I 
(4 units)


Electronic Computer Hardware Technology 142
Computer Systems and Hardware Technologies II
(4 units)


Electronic Computer Hardware Technology 144
CompTIA A+ Certification Preparation for Computer Hardware Systems
(4 untis)

Electronic Computer Hardware Technology 191
Introduction to Microprocessors and Interfacing
(3 units)

Engineering Technology 10
Principles of Engineering Technology
(3 units)
or

Engineering Technology 10A
Principles of Engineering Technology I
(1.5 units)
and

Engineering Technology 10B
Principles of Engineering Technology II
(1.5 units)

Engineering Technology 12
Introduction to Engineering Design
(3 units)
or

Engineering Technology 12A
Introduction to Engineering Design I
(1.5 units)

and

Engineering Technology 12B
Introduction to Engineering Design I
(1.5 units)

Engineering Technology 14
Electronics for Engineering Technologist
(3 units)
or

Engineering Technology 14A
Electronics for Engineering 
Technologist I

(1.5 units)
and

Engineering Technology 14B
Electronics for Engineering 
Technologist II

(1.5 units)

Engineering Technology 16
Computer Integrated Manufacturing
(3 units)
or

Engineering Technology 16A
Computer Integrated Manufacturing I
(1.5 units)
and

Engineering Technology 16B
Computer Integrated Manufacturing II
(1.5 units)

Engineering Technology 18
Engineering Design and Development
(3 units)
or

Engineering Technology 18A
Engineering Design and Development I
(1.5 units)
and

Engineering Technology 18B
Engineering Design and Development II
(1.5 units) 

Machine Tool Technology 10B
Computer Numerical Control Programming
(3 units)

Machine Tool Technology 10J
Numerical Control Graphics Programming
(3 units)

Machine Tool Technology 10K
3D Numerical Control Graphics Programming
(3 units)

Machine Tool Technology 103
Conventional and CNC Turning
(4 units)

Machine Tool Technology 105
Conventional and CNC Milling
(4 units)

Machine Tool Technology 107
Advanced Manufacturing Processes
(4 units)

Manufacturing Technology 70
Basic Robotics
(2 units)

Manufacturing Technology 75
Integrated Robotic and Automated Technologies
(3 units)
or

Manufacturing Technology 75A
Integrated Robotics and Automated Technologies I
(1.5 units)
and

Manufacturing Technology 75B
Integrated Robotics and Automated Technologies II
(1.5 units)

Welding 1
Introduction to Welding Process
(8 units)

Welding 5
Basic Welding Technology
(8 units)

Welding 23
Advanced Arc Welding Specialty Lab
(2 units)

Welding 40A
Introduction to Gas Tungsten Arc Welding (GTAW)
(3 units)

Welding 45
Structural Fabrication
(5 units)


a maximum of 4 units from:  
Computer Aided Design/Drafting 95
Cooperative Work Experience Education
(2-4 units)

Electronic Computer Hardware Technology 95
Cooperative Work Experience Education
(2-4 units)
Machine Tool Technology 95
Cooperative Work Experience Education
(2-4 units)


Welding 95

Cooperative Work Experience Education
(2-4 units)
Total Units: 37  















































Certificate of Achievement

 




Manufacturing Technology Program and Degrees

 

Certificate of Achievement

   
El Camino College offers a variety of certificate programs. A Certificate of Achievement is recorded on a student’s transcript. A Certificate of Accomplishment is not recorded on the transcript. Each of the programs requires completion of courses in a particular field. Unlike degree programs, courses outside the field are not generally required.

Certificate of Achievement is awarded to students who complete the prescribed program with a 2.0 grade point average.

Certificate of Achievement with Honors
 is awarded to students who complete the prescribed program with a 3.0 grade point average. 
A Certificate of Achievement with High Honors is awarded to students who complete the prescribed program with a 3.5 grade point average or above.

A Certificate of Achievement will be granted upon completion of the courses listed below. At least 50% of the courses for the Certificate of Achievement must be completed at El Camino College.
Admin Degree Check-list Flyer Administration of Justice Check List Banner
       
Manufacturing Technology Option:    
At least 50% of the major requirements for the Assiciate in Science Degree must be completed at El Camino College.  
Major Requirement: 19 units
Machine Tool Technology 101
Introduction to Conventional and CNC Machining
(4 units)
Machine Tool Technology 10A
Introduction to CAD and CAM
(3 units)
or    
Computer Aided Design and Drafting 7
Solid Modeling, Assemblies and Two Dimensional (2D) Drawings 
(3 units)

or

Computer Aided Design and Drafting 5
Introduction to Mechanical Drafting
(3 units)

Machine Tool Technology 40
Machine Shop Calculations
(3 units)
Machine Tool Technology 2
Manufactoring Print Reading
(3 units)





Electronic Computer Hardware Technology 11
Introduction to Electronics
(3 units)

Welding 15
Basic Welding for Allied Fields
(3 units)



















a minimum of 18 units from:    

 

 

 

 

 

 

Computer Aided Design/Drafting 28
Parametric Three Dimensional (3D) Modeling and Assemblies
(2 units)

Computer Aided Design/Drafting 31
Orientation to CATIA
(2 units)

Computer Aided Design/Drafting 32
Product Modeling with CATIA
(2 units)

Computer Aided Design/Drafting 33
Analyses and Simulations with CATIA
(2 units)

Computer Aided Design/Drafting 37
Advanced CATIA Functions
(2 units)

Computer Aided Design/Drafting 45
Geometrical Dimensioning and Tolerancing
(3 units)

Electronic Computer Hardware Technology 22
Basic Electronic Fabrication
(3 units)


Electronic Computer Hardware Technology 110
Introduction to Direct and Alternating Current Circuits
(3 untis)


Electronic Computer Hardware Technology 120
Semiconductor Power Devices
(3 units)


Electronic Computer Hardware Technology 122
Semiconductor Power Devices
(3 units)


Electronic Computer Hardware Technology 124
Operational Amplifiers and Linear Integrated Circuits
(3 units)


Electronic Computer Hardware Technology 130
Digital Systems and Computer Logic I
(3 units)


Electronic Computer Hardware Technology 140
Computer Systems and Hardware Technologies I 
(4 units)


Electronic Computer Hardware Technology 142
Computer Systems and Hardware Technologies II
(4 units)


Electronic Computer Hardware Technology 144
CompTIA A+ Certification Preparation for Computer Hardware Systems
(4 untis)

Electronic Computer Hardware Technology 191
Introduction to Microprocessors and Interfacing
(3 units)

Engineering Technology 10
Principles of Engineering Technology
(3 units)
or

Engineering Technology 10A
Principles of Engineering Technology I
(1.5 units)
and

Engineering Technology 10B
Principles of Engineering Technology II
(1.5 units)

Engineering Technology 12
Introduction to Engineering Design
(3 units)
or

Engineering Technology 12A
Introduction to Engineering Design I
(1.5 units)

and

Engineering Technology 12B
Introduction to Engineering Design I
(1.5 units)

Engineering Technology 14
Electronics for Engineering Technologist
(3 units)
or

Engineering Technology 14A
Electronics for Engineering 
Technologist I

(1.5 units)
and

Engineering Technology 14B
Electronics for Engineering 
Technologist II

(1.5 units)

Engineering Technology 16
Computer Integrated Manufacturing
(3 units)
or

Engineering Technology 16A
Computer Integrated Manufacturing I
(1.5 units)
and

Engineering Technology 16B
Computer Integrated Manufacturing II
(1.5 units)

Engineering Technology 18
Engineering Design and Development
(3 units)
or

Engineering Technology 18A
Engineering Design and Development I
(1.5 units)
and

Engineering Technology 18B
Engineering Design and Development II
(1.5 units) 

Machine Tool Technology 10B
Computer Numerical Control Programming
(3 units)

Machine Tool Technology 10J
Numerical Control Graphics Programming
(3 units)

Machine Tool Technology 10K
3D Numerical Control Graphics Programming
(3 units)

Machine Tool Technology 103
Conventional and CNC Turning
(4 units)

Machine Tool Technology 105
Conventional and CNC Milling
(4 units)

Machine Tool Technology 107
Advanced Manufacturing Processes
(4 units)

Manufacturing Technology 70
Basic Robotics
(2 units)

Manufacturing Technology 75
Integrated Robotic and Automated Technologies
(3 units)
or

Manufacturing Technology 75A
Integrated Robotics and Automated Technologies I
(1.5 units)
and

Manufacturing Technology 75B
Integrated Robotics and Automated Technologies II
(1.5 units)

Welding 1
Introduction to Welding Process
(8 units)

Welding 5
Basic Welding Technology
(8 units)

Welding 23
Advanced Arc Welding Specialty Lab
(2 units)

Welding 40A 
Introduction to Gas Tungsten Arc Welding (GTAW)
(3 units)

Welding 45
Structural Fabrication
(5 units)


a maximum of 4 units from:  
Computer Aided Design/Drafting 95
Cooperative Work Experience Education
(2-4 units)

Electronic Computer Hardware Technology 95
Cooperative Work Experience Education
(2-4 units)
Machine Tool Technology 95
Cooperative Work Experience Education
(2-4 units)


Welding 95

Cooperative Work Experience Education
(2-4 units)
Total Units: 37  















































Associate in Science